The laptop AC adapter provides the power necessary to recharge a laptop’s battery, and can also power the laptop without the need to use battery power.Acer laptop AC adapters come in a variety of shapes and sizes. Wattage can vary from 60 watts to 180 watts depending on the power needs of each model of laptop. Step Size Quantity Screw Type HDD Carrier M3*3 5. Remove the HDD from the carrier. Use the Flash utility to update the system BIOS Flash ROM. NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery Diskette before you use the Flash utility.
The password length can not exceed 8 alphanumeric characters (A-Z, a-z, 0-9, not case sensitive). Page 46: Changing A Password Changing a Password Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. Chapter 3… Page 154 5. Connect the speaker cable to the mainboard connector. 6. Connect and lock the touch pad FFC to the mainboard connector. Service & Support | Acer Official Site in Products in Support in Press in Support in Supportin Answers in answersin Discussions in discussions.
Chapter 3… Page 140 4. Connect the DC-In power cable to the mainboard connector. 5. Place the mainboard in the chassis. Page 123 4. Replace the adhesive tape securing the microphone cable and the antenna together. Chapter 3… Page 99: Removing The Thermal Module Removing the Thermal Module 1. See “Removing the Mainboard” on page 85. 2. Locate the thermal module on the mainboard. 3. Disconnect the fan cable connector from the mainboard connector. Remove 4x phillips screws and disconnect: Power On button flex cable Touch pad flex cable Remove 18x Phillips screws from the bottom cover.